このアイテムの引用には次の識別子を使用してください:
https://hdl.handle.net/20.500.12394/14062
タイトル: | Subgrade Improvement With Recycled Polymer (PET) in Clay Soils for Rural Roads |
著者: | Taipe Sanchez, Jhoel Javier Robles Flores, Denys Xohaid Crispin Gutierrez, Jherson Cristian Gamboa Tolentino, Erick Oswaldo Platero Morejón, Iralmy Yipsy Velásquez Montoya; Niel Iván |
metadata.dc.contributor.advisor: | Velasquez Montoya, Niel Iván |
キーワード: | Carreteras Zonas rurales Suelos Estabilización de suelos Polímeros Reciclaje |
出版者: | Universidad Continental |
発行日: | 2023 |
metadata.dc.date.available: | 1-3月-2024 |
引用: | Taipe, Jh., Robles, D., Crispin, Jh., Gamboa, E., Platero, I. y Velásquez, N. (2023). Subgrade Improvement With Recycled Polymer (PET) in Clay Soils for Rural Roads. Tesis para optar el título profesional de Ingeniero Civil, Escuela Académico Profesional de Ingeniería Civil, Universidad Continental, Huancayo, Perú. |
metadata.dc.identifier.doi: | https://doi.org/10.13189/cea.2023.110810 |
抄録: | The project provides information on the physical and mechanical properties of clay soils stabilized with recycled polymers (PET) as subgrade improvement in rural roads in the district of Sicaya, because this area does not have paved roads nearby which cause inaccessibility to the population; also by using PET for soil improvement, an added value was given to this material generating a lower environmental impact. In order to fulfill the objective of the research, the physical properties of two soil specimens from Jr. La Libertad in the district of Sicaya were determined; sieving tests of granulometry, consistency limits, modified proctor and soil classification by SUCS and AASHTO were performed. Once the soil properties were evaluated, the optimum size of the PET particles for its application was determined by CBR tests using 1% of PET as a proof. It was found that the optimum size was from 5 mm to 10 mm, and to find the optimum percentage of polymers to be applied, four percentages of recycled polymers were used: 0.5%, 1.0%, 1.5% and 2.0%; these percentages were proposed for the two specimens analyzed. It was obtained that the percentage of 1.5% was the one that provided the highest CBR index, having 7.15% and 4. 87% of CBR at 95% compaction for the first and second specimen respectively; the latter turned out to be lower than the 6% CBR required as a minimum by the Highway Manual, and this was because the second specimen presented more fine material than the first specimen having a high value of 77.77%, which is not recommended for using recycled polymers according to this research. |
metadata.dc.relation: | https://www.hrpub.org/journals/article_info.php?aid=13465 |
Extension: | p. 2936-2949 |
metadata.dc.rights.accessRights: | Acceso abierto |
metadata.dc.source: | Universidad Continental Repositorio Institucional - Continental |
出現コレクション: | Tesis |
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
IV_FIN_105_TE_Taipe_Robles_Crispin_Gamboa_Platero_Velásquez_2023.pdf | Taipe Sanchez, Jhoel Javier; Robles Flores, Denys Xohaid; Crispin Gutierrez, Jherson Cristian; Gamboa Tolentino, Erick Oswaldo; Platero Morejón, Iralmy Yipsy; Velásquez Montoya, Niel Iván | 1.55 MB | Adobe PDF | 見る/開く |
IV_FIN_105_Autorización_2023.pdf Restricted Access | Autorización | 1.14 MB | Adobe PDF | 見る/開く 別刷り依頼 |
Informe_Turnitin.pdf Restricted Access | Informe de Turnitin | 1.87 MB | Adobe PDF | 見る/開く 別刷り依頼 |
このアイテムは次のライセンスが設定されています: クリエイティブ・コモンズ・ライセンス