Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/20.500.12394/7794
Título: | Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method |
Título Alternativo: | Diseño de malla de perforación y voladura para minería subterránea utilizando el método Holmberg |
Autor(es): | Poma, Max Quispe, Grimaldo Mamani-Macedo, Nestor Zapata, Gianpierre Raymundo-Ibañez, Carlos Dominguez, Francisco |
Palabras clave: | Voladura Holmberg Minería subterránea |
Editorial: | Universidad Continental |
Fecha de publicación: | 3-abr-2020 |
Fecha disponible: | 16-jul-2020 |
Cita bibliográfica: | Poma, M., Quispe, G., Mamani, N. Zapata, G., Raymundo, C., Dominguez, F. (2020). Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. Advances in Intelligent Systems and Computing, 1(1), 683-689. https://doi. 10.1007/978-3-030-44267-5_103 |
DOI: | 10.1007/978-3-030-44267-5_103 |
Resumen/Abstract: | To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause. |
Notas: | Para acceder al artículo de su interés, puede solicitarlo a bibliotecario@continental.edu.pe. Por favor comunicarse desde su correo institucional. |
Incluido en: | https://www.springer.com/series/11156 |
Extensión: | p. 683-689 |
Acceso: | Restringido |
Fuente: | Universidad Continental Repositorio Institucional - Continental |
Aparece en las colecciones: | Artículos de conferencias |
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Los ítems del Repositorio están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.