Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/20.500.12394/7806
Título: | Electromechanical Device for Temperature Control of Internal Combustion Engines |
Título Alternativo: | Dispositivo electromecánico para control de temperatura de motores de combustión interna |
Autor(es): | Mamani, A. Quispe, G. Raymundo-Ibañeez, C. |
Palabras clave: | Motores Sistemas de refrigeración del automóvil |
Editorial: | Universidad Continental |
Fecha de publicación: | 25-nov-2019 |
Fecha disponible: | 17-jul-2020 |
Fecha de elaboración: | 2020 |
Cita bibliográfica: | Mamani, A., Quispe, G., Raymundo, C. (2019). Electromechanical Device for Temperature Control of Internal Combustion Engines. IOP Conference Series: Materials Science and Engineering, 689(1). https://doi. 10.1088/1757-899X/689/1/012015 |
DOI: | 10.1088/1757-899X/689/1/012015 |
Resumen/Abstract: | Internal combustion engines are the most commonly used engines in the automotive world. However, these engines lack an overheating prevention system against cooling system failures when they exceed their normal operating temperature. Less experienced drivers (users) usually do not notice overheating until the engine stops, generating economic expenses in engine repairs. As such, this paper describes the design and construction of an electromechanical device to prevent engine overheating. This device is installed in a vehicle and operates independently from the electronic control unit (ECU); it records the coolant temperature and controls air admission to the engine of the vehicle in which it is installed. In addition, a new Arduino-based card will receive signals from a temperature sensor as input and process them according to its programming. Then, it will send signal outputs to the actuators: a servomotor, monitor, LED display, and buzzer. To control the intake flow, a butterfly valve is used with the servomotor. This valve partially or totally restricts the engine airflow, based on the temperature programmed for the Arduino, thus protecting the engine from overheating. |
Incluido en: | https://iopscience.iop.org/article/10.1088/1757-899X/689/1/012015 |
Acceso: | Acceso abierto |
Fuente: | Universidad Continental Repositorio Institucional - Continental |
Aparece en las colecciones: | Artículos de conferencias |
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons